AVPro Edge AC-EX150-BKT – 150M 18Gbps Basic HDMI HDBaseT Extender Kit
Product Information
Product Documents
Long Distance (150 Meters) 4K HDMI Extender
Description
The AC-EX150-BKT is an AVPro Edge benchmark long-distance HDMI extender.
Game-changing at 150 meters for 1080p, it overcomes infrastructure obstacles, including dated anti-skew wiring. Underrated Category 5e wire commonly found in retro scenarios and signal-disruptive splices, couplers, or punch-down blocks are no match for the AC-EX150-BKT, as it will also transport 18 Gbps, 4K HDMI 2.0 signals flawlessly for 100 meters.
Retrofit site surveys often reveal havoc-causing infrastructure or proposal-ending wire types. Never pass on retro opportunities again with the AC-EX150-BKT. Project Impossible turns into Project Profitable. If on-site analysis confirms signal continuity with Cat 5e (or better) cabling, the AC-EX150-BKT will deliver up to a 4K UHD image, accurately and artifact-free, to TVs or projectors at extended Category wire transmission distances now up to 100 meters, and a 1080p signal up to 150 meters.
AVPro Edge mainstay multi-tool features help to augment the AC-EX150-BKT’s retrofit capabilities. These include EDID management, updated robust CEC capabilities, 4K to 1080p downscaling, kit PoH from a single PSU, and bi-directional RS-232 and IR control.
Make retrofitting retro-cool with the AVPro Edge AC-EX150-BKT
Application Note: The AC-EX150-KIT must only be used with the included proprietary power supply. While similar in appearance to other AVPro Edge PSUs, voltage and amperage are specific to the AC-EX150-KIT and are required for successful kit operation.
Specifications
| Video: | |
| Video Resolutions | Up to 4K 60 Hz 4:4:4 |
| VESA Resolutions | Up to DCI 4K (4096×2160) |
| Color Space | YUV (Component), RGB
(CSC: Rec. 601, Rec. 709, ITU R-BT.2020, DCI-P3-D65) |
| Chroma Subsampling | 4:4:4, 4:2:2, 4:2:0 Supported |
| Deep Color | Up to 16-bit (1080p) Up to 12-bit (4K) |
| Audio: | |
| Audio Formats Supported HDMI | PCM 2.0 Ch, LPCM 5.1 & 7.1, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS 5.1, DTS-HD Master Audio, DTS:X |
| Distance: | |
| HDBaseT Distance (4K & HDR) | 100 m (330 ft) (Cat 6a) |
| HDBaseT Distance (Full HD) | 150 m (492 ft) (Cat 6a) |
| HDMI Lead In/Out | Up to 50 ft (Using Bullet Train HDMI) |
| HDMI Lead In/Out (W/ AOC Cable) | Up to 130 ft (Using Bullet Train AOC) |
| Other: | |
| Bandwidth | 18 Gbps |
| HDCP | HDCP 2.3 and earlier |
| Ports: | |
| HDMI (TX & RX) | Type A |
| HDBaseT | RJ45 w/ PoH for HDBaseT Receivers |
| IR TX (TX & RX) | 3.5 mm stereo (3-conductor) |
| IR RX (TX & RX) | 3.5 mm mono (2-conductor) |
| RS-232 (TX & RX) | 3-Pin Terminal Block |
| Power (TX & RX) | Barrel Type |
| Environmental: | |
| Operating Temperature | 23 to 125°F (-5 to 51°C) |
| Storage Temperature | -4 to 140°F (-20 to 60°C) |
| Humidity Range | 5-90% RH (No Condensation) |
| Power: | |
| Power Consumption (Total) | 16.8 Watts maximum |
| Power Supply – Matrix | Input: 100-240 VAC ~ 50/60 Hz Output: 24V DC at 0.7 A |
| Dimensions: | |
| Dimensions (Single Unit Only Width/Depth/Height) | mm: 100 x 69 x 23 in: 3.94 x 3.72 x 0.91 |
| Dimensions (Kit Packaged Width/Depth/Height) | mm: 152 x 267 x 85 in: 6 x 10.5 x 3.35 |
| Weight (Single Unit) | 6.2 oz (0.39 lbs.) (0.17 kg) |
| Weight (Kit Packaged) | 18.08 oz (1.13 lbs.) 18.08 (0.51 kg ) |
| *Specifications subject to change without notice. Mass & dimensions are approximate | |
Additional information
| Dimensions | 12 × 6 × 4 in |
|---|
