Lowell LPR Portable AV Rack Series
Portable AV Rack with Vented Door
Fully-welded mobile rack is 16-gauge steel construction with 14-gauge base reinforced at load-bearing junctions. It features a solid top and base, welded sides, fully-vented front door and vented rear door. Includes four casters for field installation. Optional overhanging laminate top with rounded corners adds a premium finish (order separately).
Available in 24U, 35U, 40U, and 44U
–
–
Lowell LPTR Pull & Turn AV Rack Series
Pull & Turn AV Rack Series
For built-in applications in credenzas, cabinetry or millwork, the top section of the rack slides forward on four (4) support rails set into its base, then rotates left or right and locks at 60 or 90 degrees for superior access to equipment and connections. The rack features four corner post mounting rails and a front securing/finishing panel. Ships unassembled in two cartons.
Available in 24U, 35U, 40U, and 44U
–
Lowell Solid Steel Front Doors for 22″ / 23″ Racks
Solid steel front door surface-mounts to Lowell 22-inch and 23-inch wide racks (LDTR, LER, LGR, LGNR, LGTR, LPR, LSER, LSGR, LWBR, LWR, LWSR Series). The steel with black-textured powder-coat finish door is reversible and mounts with left- or right-hand swing using nutserts provided with the specified rack. Features integral handle and key lock (keyed differently than rack’s recessed rear door).
Lowell Solid Steel Side Panels for Racks
Solid side panels for Lowell 22-inch wide and 23-inch wide racks are U.S. steel construction with black wrinkle textured powder epoxy finish. Panels include integral handles. Note that larger panels include four pieces (two per side) for maneuverability. Use with rack series LGR, LSGR, and LGNR See individual rack spec sheets for size and fit. Side panels are sold in pairs.
Lowell 10-32 Rack Rails with Hardware for 23″ Wide Rack
The RRD Series of mounting rails are made to fit most 23-inch wide racks (LER, LFR, LSER, LGR, LSGR, LPR, LWBR and LWR rack series). These racks feature side channels to adjust rail positioning deeper into the rack, as needed. RRD rails are 11-gauge U.S. steel with a black powder epoxy finish and printed RU scale to facilitate set-up. The 1U position should be placed at the bottom of the rack for consistent loading of equipment. RRN rails accept threaded 10-32 screws. Sold in pairs. Note: See video below for information on Lowell’s 4 types of rack rails.
Lowell Rack Panel with Four Fans – Universal Input Voltage – Thermo-probe
The 2U x 19″W rack-mount fan panel features universal input voltage (100VAC–240VAC) so it can be used almost anywhere in the world, and four fans. Each panel includes a thermostat probe to automatically control fan operation according to ambient temperature.
Lowell Blank Aluminum Panel with Flange, Textured Black
Blank aluminum 19-inch panels with black-textured powder coat finish have a flange for added strength. Panels are available from 1 to 4 rack units and can be ordered individually or in multi-pack cartons.
Lowell Blank Steel Rack Plates with Flat Edges – Smooth Black
Blanking panels for 19-inch EIA equipment racks are certified-USA steel construction with smooth-black powder-coat finish. Available in 1U-4U and 6U rack space.
Lowell Blank Steel Rack Plates with Flange – Smooth Black
The SEP Series blanking panel is 18-gauge steel with a flange for added strength and a smooth black powder epoxy finish. The 19-inch wide panel is available in various heights, from from 1/3 to 6 rack units.
