Lowell LCDR AV Rack Series
Configured Designer Series Racks
Pre-configured for performance, protection, and presentation.
All-in-one, high-end enclosed rack with solid top vents, cable management, adjustable rails, smoked glass door, and lockable side and rear covers. Supports 500 to 1200 lbs, includes whisper fans, casters, levelers, and steel shelves. Designed for executive or home theater decor.
–
Available in 18U, 27U, 35U, or 42U sizes
–
Lowell LDR AV Rack Series
Designer Series AV Rack with Tempered Glass Door
An elegant equipment rack designed to fit with the high-end decor of executive boardrooms or home theaters, the LDR rack features a charcoal grey textured finish and a tempered glass front door. Equipment is easy to access with removable side panels and a removable rear door that opens from the top. To save set-up time, this rack can also be ordered in a pre-configured version with fans, shelves, blank panels and swivel casters for maneuvering; see the Lowell LCDR Series
–
Available in 18U, 27U, 35U, and 42U
–
Lowell LER AV Rack Series
Enclosed AV Rack Series with Rear Door
The LER Series 19-inch standalone AV rack is fully-welded USA-certified steel, reinforced at load-bearing junctions for robust support. Welded side panels feature upper and lower vents for passive ventilation. The rack includes adjustable mounting rails that can be repositioned deeper into the rack as needed to accommodate equipment controls. Beveled corners. Black-textured powder-coat finish. Rack includes recessed rear door with keyed lock. An optional front door is available separately (LFD Series).
–
Available in 18U, 21U, 24U, 35U, 40U,AND 44U sizes.
–
Lowell LGR AV Rack Series
Gangable AV Rack
Fully-welded, 16-gauge steel open-frame rack with 14-gauge steel base is reinforced at load-bearing junctions for robust support. The rack has a configurable top opening that can be closed with optional 19-inch fan panels for active cooling. The gangable rack features a 23-inch wide footprint and black-textured powder-coat finish. Available with or without a rear door. Optional front door and side panels (order separately).
–
Available in 24U, 35U, 40U, and 44U
–
Lowell LWR Wall-Mount AV Rack Series
Swing-Open AV Rack Series
Heavy-duty sectional wall rack features a front mounting section that swings open from its backbox, allowing easy access to cables and equipment. The welded 16-gauge steel rack features fully-gusseted corners and a triple-formed (side-to-bottom, side-to-top) wrap design that mounts to the backbox with positive-locking, spring-loaded L-pins. A roller closure keeps the front closed without mandatory locking. USA-certified steel with black-textured powder-coat finish. Optional front door (order separately).
–
Available in 7U, 10U, 12U, 16U,21U,24U, and 35U
–
Lowell LXR Ready-to-Assemble AV Rack Series
Ready-to-Assemble AV Rack Series
Slim open-frame AV rack with 19-inch wide footprint is ideal for cabinets, closets or credenzas where space is at a premium but it can also serve as a stand-alone or gangable floor rack. The top has two vents, while the base features a large center opening. Steel with smooth-black powder-coat finish. Ships unassembled.
–
Available in 8U, 14U, 22U, 30U; 21 inches deep
–
Lowell LPR Portable AV Rack Series
Portable AV Rack with Vented Door
Fully-welded mobile rack is 16-gauge steel construction with 14-gauge base reinforced at load-bearing junctions. It features a solid top and base, welded sides, fully-vented front door and vented rear door. Includes four casters for field installation. Optional overhanging laminate top with rounded corners adds a premium finish (order separately).
Available in 24U, 35U, 40U, and 44U
–
Lowell LPTR Pull & Turn AV Rack Series
Pull & Turn AV Rack Series
For built-in applications in credenzas, cabinetry or millwork, the top section of the rack slides forward on four (4) support rails set into its base, then rotates left or right and locks at 60 or 90 degrees for superior access to equipment and connections. The rack features four corner post mounting rails and a front securing/finishing panel. Ships unassembled in two cartons.
Available in 24U, 35U, 40U, and 44U
–
Lowell Solid Steel Front Doors for 22″ / 23″ Racks
Solid steel front door surface-mounts to Lowell 22-inch and 23-inch wide racks (LDTR, LER, LGR, LGNR, LGTR, LPR, LSER, LSGR, LWBR, LWR, LWSR Series). The steel with black-textured powder-coat finish door is reversible and mounts with left- or right-hand swing using nutserts provided with the specified rack. Features integral handle and key lock (keyed differently than rack’s recessed rear door).
Lowell Solid Steel Side Panels for Racks
Solid side panels for Lowell 22-inch wide and 23-inch wide racks are U.S. steel construction with black wrinkle textured powder epoxy finish. Panels include integral handles. Note that larger panels include four pieces (two per side) for maneuverability. Use with rack series LGR, LSGR, and LGNR See individual rack spec sheets for size and fit. Side panels are sold in pairs.
Lowell 10-32 Rack Rails with Hardware for 23″ Wide Rack
The RRD Series of mounting rails are made to fit most 23-inch wide racks (LER, LFR, LSER, LGR, LSGR, LPR, LWBR and LWR rack series). These racks feature side channels to adjust rail positioning deeper into the rack, as needed. RRD rails are 11-gauge U.S. steel with a black powder epoxy finish and printed RU scale to facilitate set-up. The 1U position should be placed at the bottom of the rack for consistent loading of equipment. RRN rails accept threaded 10-32 screws. Sold in pairs. Note: See video below for information on Lowell’s 4 types of rack rails.