AudioControl Bijou 5100D Five-Channel Integrated Amplifier with Line-level Subwoofer Output and Dante Audio
– HDMI eARC input transfers uncompressed high-bandwidth source audio, including Dolby Atmos, Dolby TrueHD, DTS, and DTS-HD Master Audio.
– GaN-based high-power, hyper-performance, Class-D amplifier design
– 65 W into 8 Ω, 130 W into 4Ω, all channels driven
– Dante audio networking support
– Analog and Digital Inputs; Analog Stereo Preamp and Subwoofer outputs
– IP and IR-Controllable for seamless third-party automation compatibility
AVPro Edge AC-MXNET-10G-TCVR-PRO MXNet 10G Transceiver Encoder/Decoder Unit
AVPro Edge AC-DANTE-D Audio Receiver 2CH Dante Network Decoder
AVPro Edge AC-DANTE-E Audio Transmitter 2CH Dante Network Encoder
AVPro Edge MXnet USP Plus Transceiver
4K60 H.265/264 AV over IP Transceiver with AVPro Flow
– 4K60 Encoding/4K60 Decoding
– Simultaneous Encode/Decode
– Low-Bandwidth H.265 & H.264 with AVPro Flow Interoperability
– Up to 7-Window Multiview Processing
– 2CH Dante/AES67 Audio
AVPro Edge MXnet USP Pro Transceiver
4K60 H.265/264 AV over IP Pro Transceiver with AVPro Flow
– 4K60 Encoding/8K30 Decoding
– Simultaneous Encode/Decode
– Low-Bandwidth H.265 & H.264 with AVPro Flow Interoperability
– Up to 16-Window Multiview Processing
– USB-C Single Cable Solution
– 2CH Dante/AES67 Audio
AVPro Edge MXnet E-Series 24 Port Network Switch
E-series 24‑port 1G (copper) MXnet switch with 4×10G SFP+ stacking ports
– Pre-configured support for MXnet USP, 1G Evolution I & Evolution II, and Dante audio.
– Cost-effective enhanced L2.5 architecture for networks needing more control with segmentation, providing balance, and scalability for effortless expansion.
– 4 x1 Gbps SFP non-blocking, plannable USP/Dante stacking bandwidth (1.44 Gbps maximum USP).
– Optimized for AV-over-IP jumbo frames, VLAN, QoS, and IGMP settings with no manual configuration required.
– 370 watts PoE+ capacity
AVPro Edge MXnet E-Series 48 Port Network Switch
E-series 48‑port 1G (copper) MXnet switch with 4×10G SFP+ stacking ports
– Pre-configured support for MXnet USP, 1G Evolution I & Evolution II, and Dante audio.
– Cost-effective enhanced L2.5 architecture for networks needing more control with segmentation, providing balance, and scalability for effortless expansion.
– 6x 1 Gbps/10 Gbps SFP+ non-blocking, plannable USP/Dante stacking bandwidth (60 Gbps stacking, 2.88 Gbps maximum USP).
– Optimized for AV-over-IP jumbo frames, VLAN, QoS, and IGMP settings with no manual configuration required.
– 740 watts PoE+ capacity
