• No products in the cart.

ROBOfiber LFC-1002-SFP two RJ45 ports Gigabit Ethernet to 100/1000BaseX SFP slot fiber media converter, LFP and DIP sw settings

ROBOfiber LFC-1002-SFP two RJ45 ports Gigabit Ethernet to 100/1000BaseX SFP slot fiber media converter, LFP and DIP sw settings

Requires (1) 1GB Single mode or Multi mode SFP Module
Find them here

Availability: In Stock

Product Information

* Note: AC 90-240V power adapter is included in carton package.

Product description

LFC series are newest series of media converters. The LFC-1002-SFP is a two port RJ45 10/100/1000Base-Tx to single 100/1000Base-X SFP slot unmanaged Gigabit media converter. The RJ-45 copper ports have auto-negotiation 10/100/1000 and MDI/MDI-X features and DIP switch settings available for Jumbo frame, Fiber port speed and VLAN port based functions for maximum flexibility and fine tuning of the fiber or copper link connection. LED indicators signal the power status of the converter, UTP port speed, UTP Link, FX port Link and FX speed. Used with their compatible LFC-CH12 fiber optic chassis they can be aggregated up to 12 units in a 19″ wide and only 1RU of height space only. This is the highest density attainable for unmanaged fiber media converters.

The LFC-1002-SFP Gigabit media converter is one of the most demanded Gigabit fiber media converters. It also includes a wall mounting solution for individual converters named LFC-WMK.


  • 2x RJ45 10/100/1000Base-Tx ports and 1x 100/1000Base-X fiber media converter/switch
  • Auto-Negotiation
  • Auto MDI/MDIX
  • Forward 2048 bytes (Max.) packets in switch mode (copper & fiber port in different speed)
  • Forward 9k bytes in converter mode (fiber & copper port at the same speed, Jumbo DIP set)
  • Provides DIP switch to set function
    • Select fiber speed (100/1000M)
    • RJ45 port based VLAN enable / disable
    • Jumbo packet 9K enable / disable
  • Supports Q in Q double tagged frame transparent
  • Supports IEEE 802.1Q Tag VLAN pass thru
  • Aggregates into LFC-CH12 series chassis available with various power supplies

Technical specifications

Copper interface: 2x RJ45 copper IEEE 802.3 10Base-T, 802.3u 100Base-TX compliant and IEEE 802.3ab 1000Base-T compliant
Optical interface: 155M/1.25G SFP slot (100/1000BaseX)
Ethernet interface: Supports 10/100/1000Base-T/TX, Full, Half duplex n-way (Auto-Negotiation). Supports Full, Half duplex, 10/100/1000 speed manual selection. Transmission Packet Rate for 10/100/1000Base-T/TX : 14880 per second /148800/1488000 per second. Copper TP cable 4 pair Cat. 5, 5e or 6 UTP
Optical connector: LC connector for SFP module (SFP transceiver NOT included)
Front LEDs: PWR, Fiber Link, TP Link, Speed
Power: External 90-260V AC switching adapter 12VDC@1A with NEMA1-15(2 blades only), US type main plug
AC 90-240V power adapter is included in carton package
Temperature: 0~50°C (Operating); -30~70°C (Storage)
Humidity: 10-85% non condensing (Operating); 0-90% (Storage)
Consumption: less than 4W
Dimensions(WxDxH): 60mm x 90mm x 20mm
Weight: 180g (without AC adapter)
Compliance: FCC part 15, Subpart B, Class A, ANSI C63.4:2003 CE EN55022:2006, Class A EN55024:1998+A1:2001+A2:2003 LVD: EN 60 950-1:2001
MTBF: 65,000 hours


Additional information

Weight 0.5 lbs
Dimensions 3.5 × 3.5 × 3 in

PVC-coated Products; PVC-coated Wires and Cables

WARNING: This product may expose you to chemicals including DINP and/or DEHP, which are known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to or our information page: California Proposition 65 Info.