ROBOfiber SFP-7020-WC/WD 1Gb Simplex Fiber BiDi SFP transceiver Set
Compatible with single mode or multi-mode fiber optic cable
– 10km / 6.2 mile max cable distance (single mode)
– 140m / 492 feet max cable distance (multi mode)
– Simplex LC connector
– 1000Mbps max data rate
The newest SFP series of 1.25G single strand optical modules designed to run over Hybrid Fiber Coax (HFC) networks are now available to customers.
The SFP-7020-WC and SFP-7020-WD are using 1310nm and 1490nm wavelengths, leaving the 1550nm lambda free for the HFC unidirectional signal. This technology allows usage of the existing hybrid fiber network to also transmit Gigabit Ethernet data. While the 1550nm is occupied by the television network signal, the new SFP’s use a safe window channel on 60nm to provide Gigabit Ethernet data communications over same single strand of fiber. The technology of these SFP’s is similar to the traditional 1310/1550nm WDM single strand modules, but the 1550nm wavelength has been replaced with 1490nm.
Using existing scarce resources of HFC fiber networks to carry Gigabit Ethernet close to the curb or subscriber is a key element in boosting network capacity and network access at a fraction of the cost. On severely tight networks, having the choice to reuse a fiber for multiple services can be the way to successfully redesign and operate the network and provide wider and higher quality data access services.
To implement 1310/1490nm Gigabit communication over a single strand 1550nm light fiber, a passive splitter/injector device must be used.
The 1310nm/1490nm single strand SFP solution is also available for long haul, for distances up to 60Km. For such models, please contact our sales department for availability.
- WC = Tx: 1310nm / Rx:1490nm wavelength
- WD = Tx: 1490nm / Rx:1310nm wavelength
|Dimensions||6.5 × 5 × 0.75 in|